Suitable for:
 - Ender 3 with 8 bit mainboard
 - Ender 3 Pro with 8 bit mainboard

Ender3-BLTouch-sdcard-<date>.hex
 - SD Card Support
 - Default probe offset for Creality BLTouch Mount - Change offset using M851 command and save to EEPROM with M500.
     Common offsets:
       - Petsfang Left - M851 X-48 Y-10 Z-2
       - Petsfang Right - M851 X+48 Y-2 Z-2
 - Adds G2 / G3 Arc support
 - Adds G10 / G11 Firmware based retraction (Use M207, M208, M209 to configure)
 - Slim Menus
 - Disables M503 to save space
 - Added support for Meatpack (2020-01-27 onwards)
Firmware Variant Size Build Date Downloads Feedback Download
Ender3-BLTouch-sdcard-20250121.hex 353379 bytes 2025-01-20 23:17:16 UTC 1
Score: 0
Membership Required
Ender3-BLTouch-sdcard-20250120.hex 353379 bytes 2025-01-19 23:17:09 UTC 0
Score: 0
Membership Required
Ender3-BLTouch-sdcard-20250119.hex 353379 bytes 2025-01-18 23:17:12 UTC 4
Score: 0
Membership Required
Ender3-BLTouch-sdcard-20250118.hex 353379 bytes 2025-01-17 23:17:12 UTC 1
Score: 0
Membership Required 
commit 4e72b17a88b877ab66bad400bc7caf652b0f89a3
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Fri Jan 17 00:26:47 2025 +0000

    [cron] Bump distribution date (2025-01-17)
Ender3-BLTouch-sdcard-20250117.hex 353379 bytes 2025-01-16 23:17:10 UTC 0
Score: 0
Membership Required 
commit 8b8c862615013c0d60e419156e373d8b48894753
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Jan 16 15:40:03 2025 -0600

    🔨 Skip _xfer builds unless uploading

commit 45ca25a4abc70c8a730846eea5f9914facbb7185
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Thu Jan 16 00:27:01 2025 +0000

    [cron] Bump distribution date (2025-01-16)
Ender3-BLTouch-sdcard-20250116.hex 353379 bytes 2025-01-15 23:17:11 UTC 1
Score: 0
Membership Required 
commit 8f35e9a7978788a05237afedc331e27e1e44a7e4
Author: Andrew <18502096+classicrocker883@users.noreply.github.com>
Date:   Wed Jan 15 15:30:00 2025 -0500

    🧑‍💻 Update types forward decl (#27637)

commit b4688346ab2cf2df2baeb40adbcb6e1f923ae2e1
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Wed Jan 15 00:27:11 2025 +0000

    [cron] Bump distribution date (2025-01-15)
Ender3-BLTouch-sdcard-20250115.hex 353379 bytes 2025-01-14 23:17:10 UTC 0
Score: 0
Membership Required 
commit e0c60a83a26957117726a0a104b10fc0f4922168
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Jan 14 15:18:58 2025 -0600

    🩹 Fix VALIDATE_HOMING_ENDSTOPS missing header

commit b7358449e0786c8d7230a19f4ded4ec3f9bdb3e9
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Jan 14 13:37:48 2025 -0600

    🚸 Enabled probe clearance in do_move_after_z_homing (#27593)

commit 85ebd170a9c4f5aec328d96961e33070c0de8197
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Jan 14 13:13:29 2025 -0600

    🔧 Standard filament runout pins for MKS_UI / MKS TFT (#27640)

commit 70cdfbe8fc2ca4ee9833147cef9d3fe4d38022e6
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Jan 14 12:46:32 2025 -0600

    📝 Add'l homeaxis comments

commit 5dc55150bd77eb93966b796ce702313835720a21
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Tue Jan 14 10:42:06 2025 -0800

    🔧 BTT SKRat UART driver support pending (#27639)

commit ef34fd1a3f535a1bcaed6f189db265a6dbc0998a
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Tue Jan 14 00:26:31 2025 +0000

    [cron] Bump distribution date (2025-01-14)
Ender3-BLTouch-sdcard-20250114.hex 353375 bytes 2025-01-13 23:17:11 UTC 1
Score: 0
Membership Required 
commit 854cfc016d26fc69d3fe1cbbb02b18e6c9c12aa3
Author: phizev <1267833+phizev@users.noreply.github.com>
Date:   Tue Jan 14 00:14:16 2025 +0200

    ✨ Teensy 4 hardware PWM for laser/spindle/fan (#27608)

commit b7f628ce2f12c6b450b5cb70a727e79747381b17
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Tue Jan 14 08:12:09 2025 +1300

    🩹 Fix EEPROM CRC display (#27631)

commit f54ec92ba8ed5aad202bb4af4cf136ca86681b22
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Mon Jan 13 00:30:03 2025 +0000

    [cron] Bump distribution date (2025-01-13)
Ender3-BLTouch-sdcard-20250113.hex 353375 bytes 2025-01-12 23:17:10 UTC 0
Score: 0
Membership Required 
commit 2e142725a68ec49e990e5bc30dd3aac4f2f8f762
Author: RomanFaktor <romanfaktor@gmail.com>
Date:   Sun Jan 12 04:16:34 2025 +0100

    🐛 Fix ERYONE Ery32 mini SPI for SD (#27600)

commit 6eca4bbab12448d1c2b10881e5bd39211a008c20
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Sun Jan 12 16:06:24 2025 +1300

    🔨 Migrate use_example_configs to Python (#27632)

commit de7ac7f594bc10d80b4153b716ed3bf8b5de29b2
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Sun Jan 12 04:00:10 2025 +0100

    🐛 Fix M119 filament sensor part (#27596)
    
    Fix from #27576

commit 28c591309fae16c0266ec072ffa401aa8296110f
Author: rondlh <77279634+rondlh@users.noreply.github.com>
Date:   Sun Jan 12 10:58:26 2025 +0800

    ⚡️ STM32H7 Flash Wear Leveling (#27634)

commit 55add905cba7db7113fe20a9bf38cafef0f41f45
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Sun Jan 12 00:36:21 2025 +0000

    [cron] Bump distribution date (2025-01-12)
Ender3-BLTouch-sdcard-20250112.hex 353375 bytes 2025-01-11 23:17:11 UTC 0
Score: 0
Membership Required 
commit 8d7ecad5317eadd853eade895877a4aa801b0b24
Author: Andrew <18502096+classicrocker883@users.noreply.github.com>
Date:   Sat Jan 11 16:09:49 2025 -0500

    🔨 Fix cmake build on Linux (#27605)
Ender3-BLTouch-sdcard-20250111.hex 353375 bytes 2025-01-10 23:17:11 UTC 0
Score: 0
Membership Required 
commit a7d79618b98f5fb44ada6ed4305f170623a21be2
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Fri Jan 10 00:28:20 2025 +0000

    [cron] Bump distribution date (2025-01-10)
Ender3-BLTouch-sdcard-20250110.hex 353375 bytes 2025-01-09 23:17:11 UTC 0
Score: 0
Membership Required 
commit acd825972c94faa22688907c828dde39fabf3b7c
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Jan 8 23:03:41 2025 -0600

    ✨ EVENT_GCODE_BEFORE_G29 (#27566)

commit 7eee772f6079ae3ce3bd147986c0556078acf0cd
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Thu Jan 9 17:41:03 2025 +1300

    ✨ MAX31865 Bed settings (#27611)

commit 63bc413da806888039262f9e4db0863b2950bc88
Author: Red Echidna UK <64329845+RedEchidnaUK@users.noreply.github.com>
Date:   Thu Jan 9 04:30:53 2025 +0000

    🧑‍💻 Add STM32/STM32F1 Open Drain (OD) pin mode (#27616)

commit 22977c885baaf5af82208663a95b621ea1222c25
Author: Chris <52449218+shadow578@users.noreply.github.com>
Date:   Thu Jan 9 01:53:15 2025 +0100

    ✨ Games for E3V2 + MarlinUI (#27620)

commit de76f2f21a7795123b2ac2c92b3f19aa3c0c4506
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Thu Jan 9 00:27:38 2025 +0000

    [cron] Bump distribution date (2025-01-09)
Ender3-BLTouch-sdcard-20250109.hex 353375 bytes 2025-01-08 23:17:09 UTC 1
Score: 0
Membership Required 
commit d57feeadaf161543ee26b9c4dab3d62afaaaacb8
Author: Erik van Luijk <itiserik@users.noreply.github.com>
Date:   Wed Jan 8 23:48:32 2025 +0100

    🐛 Fix JG Aurora A1 implementation (#27622)

commit 36623a238291b7e6d6ca7fec1e537dc0b8d3bc6e
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Thu Jan 9 11:44:31 2025 +1300

    🐛 Fix config embed and restore (#27628)
    
    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 83278bdc17cb36682208f93188b7fade4afa57ab
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Thu Jan 9 11:40:57 2025 +1300

    🔨 Some boards with both LPC1768/9 (#27586)

commit 30697cb53fcf6784679d3ad9785e867a7fe093a8
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Jan 8 16:06:31 2025 -0600

    🩹 Fix DGUS_LCD_UI_MKS typo
    
    Fixes #27508
    
    Co-Authored-By: vehystrix <7142781+vehystrix@users.noreply.github.com>
Ender3-BLTouch-sdcard-20250108.hex 353375 bytes 2025-01-07 23:17:11 UTC 3
Score: 0
Membership Required
Ender3-BLTouch-sdcard-20250107.hex 353375 bytes 2025-01-06 23:17:11 UTC 0
Score: 0
Membership Required

Marlin is licensed under the GPLv3. Encourage people to comply with the license!